Custom Bus & Truck Panels
(888) 402-1661
We bend body parts. When you see rust - think of us.

Thomas

Side Body Parts

Type what you are searching for


Part # C2-100

C2-100. Rub Rail Splice for C-2.  5" long.


Part # C2-107-96

C2-107-96  C2 side panel above skirt panel. 28 3/4" T  x  96"L  with 1 1/4" bend on bottom for skirt panel to blend in. These side panels must hide under the top or bottom rib of the rubrail. Can not hide in middle of rub rail or rub rail will not lie flat when installed back on to side panel.

Material: Cold Roll Etched

Part # C2-107-72

C2-107-72  C2 side panel above skirt panel. 28 3/4" T  x  72"L  with 1 1/4" bend on bottom for skirt panel to blend in. These side panels must hide under the top or bottom rib of the rubrail. Can not hide in middle of rub rail or rub rail will not lie flat when installed back on to side panel.

Material: Cold Roll Etched

Part # C2-107-48

C2-107-48  C2 side panel above skirt panel. 28 3/4" T  x  48"L  with 1 1/4" bend on bottom for skirt panel to blend in. These side panels must hide under the top or bottom rib of the rubrail. Can not hide in middle of rub rail or rub rail will not lie flat when installed back on to side panel.

Material: Cold Roll Etched

Part # C2-107-24

C2-107-24  C2 side panel above skirt panel. 28 3/4" T  x  24"L  with 1 1/4" bend on bottom for skirt panel to blend in. These side panels must hide under the top or bottom rib of the rubrail. Can not hide in middle of rub rail or rub rail will not lie flat when installed back on to side panel.

Material: Cold Roll Etched


Part # C2-207L

C2-207L  C-2 body Drivers side rear side panel. 45 3/4"L X 15"T X 9 7/8"T on tapered end.


Part # C2-207R

C2-207R  C-2 body Passender side rear side panel. 45 3/4"L X 15"T X 9 7/8"T on tapered end.


Part # CB102

CB102  Thomas fuel doors latch


Part # T095

T095  Fuel Door with latch. Stainless Steel Hinge.  7\" X 7\".

Part # T096

T096  Fuel Door with latch. Stainless Steel Hinge  9 7/8\" X 9 7/8\"  


Part # T097

T097  Thomas Body Fuel Ring. Standard Size. 10" O.D.  X  8 3/8" I.D.


Part # T098

T098  Thomas Body Fuel Ring. Oversized O.D. for use in repairing excessive rust damage.  12" O.D.  X  8 3/8 I.D.


Part # T099A

T099A  End cap 5 rib side panel

Part # T099B

T099B  End cap 3 rib side panel


Part # T100

T100   3 ribbed panel. 26 3/4” T  X  90 1/2” L  plus skirt bend. Conventional

Material: 18 Gauge Cold Roll Etched

Part # T100T

T100T   3 ribbed panel. 34” T  X  90 1/2” L  plus skirt bend. Transit

Material: 18 Gauge Cold Roll Etched